+- EmuNewz Network (https://www.emunewz.net/forum)
+-- Forum: Official Boards for Emunews Affiliated Emu Projects (https://www.emunewz.net/forum/forumdisplay.php?fid=47)
+--- Forum: Official RPCS3 Forum [archive] (https://www.emunewz.net/forum/forumdisplay.php?fid=172)
+---- Forum: RPCS3 - Commercial Games (https://www.emunewz.net/forum/forumdisplay.php?fid=193)
+----- Forum: RPCS3 - Commercial Games - Playable (https://www.emunewz.net/forum/forumdisplay.php?fid=195)
+----- Thread: Dragon's Crown [BLUS30767] (/showthread.php?tid=174291)
RE: Dragon's Crown [BLUS30767] - Annie - 04-02-2017
That's not a log, that's console output.
Log is RPCS3.log.
RE: Dragon's Crown [BLUS30767] - vartak - 04-03-2017
SETTINGS
default settings.
vulkan
1920x1080
launched through steam using steam controller as gamepad.
Installed the following .pkg files in teh following order:
1(dragons crown) gtGezZzDZDQcRXUweCxzMdeaWBqDmDhMLxInfKSnqbHJgKExkAeHAQrtsigdBXTp.pkg
2(storyteller dlc) ryrrQRCopOMVpiadCyAQdclEOVvFqrDjbKaYtgrRCQyGmgektHCqAEUgRBgGmBEg.pkg
3(1.06 patch) UP0005-NPUB31235_00-DRAGONSCROWNDL00-A0106-V0100-PE_fw4.40.pkg
RESULTS
1. game loads fine
2. I can get to the char selection etc.
3. i start tutorial. sound immediately dies
4. I finish tutorial. i get black screen of forever.
5. ????
results repeated 20 times to be sure its not random.
however. there were two times that the screen went to perma black just before char menu. after clicking "new data".
LOG files
[attachment=27512]
DXDIAG
[attachment=27513]
edit: no idea why my attachments got ganked. will redo them and upload soon. i deleted my rpcs3 folder
RE: Dragon's Crown [BLUS30767] - ssshadow - 04-03-2017
Sound thread dies and the game waits forever for a response. Try different combinations of PPU and SPU recompiler and interpreter.
RE: Dragon's Crown [BLUS30767] - vartak - 04-03-2017
(04-03-2017, 11:52 AM)ssshadow Wrote: Sound thread dies and the game waits forever for a response. Try different combinations of PPU and SPU recompiler and interpreter.
tried every combination
These three scenarios
PPU interpreter - SPU recompiler
PPU interpreter - SPU interpreter fast
PPU interpreter - SPU interpreter precise
same problem as before
These three scenarios
PPU recompiler - SPU recompiler
didn't load after a few minutes of waiting. grey screen of death
ppu recompiler spu recompiler.7z (Size: 87.9 KB / Downloads: 208)
PPU recompiler - SPU interpreter fast
didn't load after a few minutes of waiting. grey screen of death
ppu recompiler spu interpreter fast.7z (Size: 87.91 KB / Downloads: 237)
PPU recompiler - SPU interpreter precise
didn't load after a few minutes of waiting. grey screen of death
ppu recompiler spu interpreter precise.7z (Size: 87.93 KB / Downloads: 221)
RE: Dragon's Crown [BLUS30767] - vartak - 04-05-2017
i dug around on discord and someone is saying that this:
https://ci.appveyor.com/project/rpcs3/rpcs3/build/0.0.1-4089
is the build where Dragon's Crown started to fail on area transition.
RE: Dragon's Crown [BLUS30767] - vartak - 04-06-2017
ok another thing
i've been trying in vain to get my original PS3 saves to work with RPCS3.
now i did some research. i need to "decrypt" my saves.
so i got bruteforce save tool.. something i've used in the past to fiddle with my actual ps3 saves and that was fine.. however
When I place the save files in teh correct folder - then I run the tool and "decrrypt all" then exit and keep the decrypted files in place.
game thinks the save is bad and asks if i want to delete teh save and make a new one.
That said. I wonder if this is because I made hte save with a different version of the game.
the original saves come from the PS3 Disc version which is a BLUSxxxxx game, whiel my RPCS3 version is NPUBxxxxxxx,
from my own testing. I can clearly see that the NPUB game makes a BLUSxxxx save folder if you give it an empty save foldler in RPCS3 so i'm assuming the saves should be compatible.
on my ps3 i had the fully patched game and narrator DLC.
with the emu i installed
1(dragons crown) gtGezZzDZDQcRXUweCxzMdeaWBqDmDhMLxInfKSnqbHJgKExkAeHAQrtsigdBXTp.pkg
2(storyteller dlc) ryrrQRCopOMVpiadCyAQdclEOVvFqrDjbKaYtgrRCQyGmgektHCqAEUgRBgGmBEg.pkg
3(1.06 patch) UP0005-NPUB31235_00-DRAGONSCROWNDL00-A0106-V0100-PE_fw4.40.pkg
here is the save file
http://s000.tinyupload.com/index.php?file_id=46142963307929752106
RE: Dragon's Crown [BLUS30767] - brimborium - 04-06-2017
(04-05-2017, 06:36 AM)vartak Wrote: i dug around on discord and someone is saying that this:
https://ci.appveyor.com/project/rpcs3/rpcs3/build/0.0.1-4089
is the build where Dragon's Crown started to fail on area transition.
In my case, 4087 is the last version of RPCS3 that works with Dragon's Crown - but with medium-low FPS (~20-40) and the sound stutters heavily.
In 4088+, Dragon's Crown runs really smooth (60 FPS), with Vulkan AND OpenGL, also there's no sound stuttering any more.... but when starting the tutorial i can confirm: the sound thread dies and I get a black screen when the game transitions to the next room.
(specs: Geforce 1060 6 GB, 6700K, 16 GB Ram)
RE: Dragon's Crown [BLUS30767] - ssshadow - 04-07-2017
You will have to do a real git bisect for any regression testing to be useful. Once it has been mathematically determined exactly which specific commit broke things maybe open a bug report.
RE: Dragon's Crown [BLUS30767] - vartak - 04-07-2017
(04-06-2017, 10:08 PM)brimborium Wrote:(04-05-2017, 06:36 AM)vartak Wrote: i dug around on discord and someone is saying that this:
https://ci.appveyor.com/project/rpcs3/rpcs3/build/0.0.1-4089
is the build where Dragon's Crown started to fail on area transition.
In my case, 4087 is the last version of RPCS3 that works with Dragon's Crown - but with medium-low FPS (~20-40) and the sound stutters heavily.
In 4088+, Dragon's Crown runs really smooth (60 FPS), with Vulkan AND OpenGL, also there's no sound stuttering any more.... but when starting the tutorial i can confirm: the sound thread dies and I get a black screen when the game transitions to the next room.
(specs: Geforce 1060 6 GB, 6700K, 16 GB Ram)
interesting.
(04-07-2017, 12:52 AM)ssshadow Wrote: You will have to do a real git bisect for any regression testing to be useful. Once it has been mathematically determined exactly which specific commit broke things maybe open a bug report.
Someone will have to git going on this (pun intended).
without testing (yet) and according to info provided . here is aproximately where it "broke"
working
https://ci.appveyor.com/project/rpcs3/rpcs3/build/0.0.1-4087
https://github.com/RPCS3/rpcs3/pull/2491
https://github.com/RPCS3/rpcs3/commit/a6f8e4f6b31c7c3bab5b6c19614a9ba223f605c2
broken
https://ci.appveyor.com/project/rpcs3/rpcs3/build/0.0.1-4088
https://github.com/RPCS3/rpcs3/pull/2490
https://github.com/RPCS3/rpcs3/commit/1fd33f611c694543c1c4a131a53cf5dc0235c202
both seem to be around this time:
https://github.com/RPCS3/rpcs3/commits/master?after=74e806810dc1b6dd2e2c6ea3386c004e7da5ad2d+104
some people saying it broke at 4089 so i dunno. it needs to be tested. but definately march 10th is when it broke according to multiple sources.
i don't know how to cleanly test the different git commits and I couldn't get any of those (4087 4088 4089) versions from appveyor to work for me. I just got CTD or nothing
Please help!
RE: Dragon's Crown [BLUS30767] - Barduk - 04-10-2017
Heya I tried both Versions and got it to run on both with the expected results.
https://ci.appveyor.com/project/rpcs3/rp...0.0.1-4087
still working except i got a few flickering graphics I didn't see in older versions.
https://ci.appveyor.com/project/rpcs3/rp...0.0.1-4088
Blackscreen on first zone change after leaving the Inn. I used a savegame to get to the town and then went to the gate as my first action.