JPCSP Launcher [v1.8.0.4] - Printable Version

JPCSP Launcher [v1.8.0.4] - Printable Version

+- EmuNewz Network (https://www.emunewz.net/forum)
+-- Forum: PSP Emulation (https://www.emunewz.net/forum/forumdisplay.php?fid=191)
+--- Forum: JPCSP Official Forum (https://www.emunewz.net/forum/forumdisplay.php?fid=51)
+---- Forum: General discussion (https://www.emunewz.net/forum/forumdisplay.php?fid=57)
+---- Thread: JPCSP Launcher [v1.8.0.4] (/showthread.php?tid=977)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

RE: JPCSP Launcher [v1.6.0.1] - hyakki - 08-15-2011

(08-15-2011, 06:10 PM)Bloodsaw90 Wrote: First, thx to the program you have written!
Your launcher works quite fine for me, but i've got one little problem.
If i try to change some settings and save them i get the error message:
"Unable to write to:x:\xxx\xxx\jpcsp\JPCSPLauncher.ini"
Same message if i just try to end the program, seems that it automaticaly save the configs on exiting.

I am usin Windows XP Pro SP3 32bit.
The folder isnt write-protected just like the .ini file.
I already tried to use another partition and folder on another path.
I also tried to deactivate my antivirus and yes i have full administration rights on the user.
I also tried to delete the old file, and see that the program writes a new one, but always with different information in it, like its beeing interruptet while writing it.

Till now i have to end the programm via taskmanager.

Maybe u can find any solution to my problem.

Greetings

hm that's the first I've heard of this problem, sounds like something is locking the ini file causing it not to write.
what antivirus software do you use since some even though they are disabled still have their filesystem driver still enabled.
have you tried a shorter path like c:\jpcsp it could be a strange characters in the path causing an issue.

I have tested on windows XP pro sp3 32bit, I have even tested it on lan shares, usb, and removable hard drives to make sure it works on various situations, so a very strange problem.

is it the program that popups the message in the tray icon or is it an error window?

RE: JPCSP Launcher [v1.6.0.1] - blacklynx - 08-17-2011

(08-13-2011, 07:27 PM)blacklynx Wrote: Hello everybody, okay. Well, I guess this is the first comment post here, I hope its the first of many and I can help many people too. Guys, what is the optimal configuration of the JPCSP Launcher v1.6.0.1 based on my configuration? Right now using version x86 r2263. Thank you for your attention.

No reply?

RE: JPCSP Launcher [v1.6.0.1] - dista_bagus - 08-17-2011

it depend on your cpu(memory & proc).

RE: JPCSP Launcher [v1.6.0.1] - sarim - 08-19-2011

hi can you plz tell me how to config this launcher for my system
specs:core2duo 1.83ghz (ssse3)
1gb ram (ddr2)
x3100 graphic card
than you

RE: JPCSP Launcher [v1.6.0.1] - Hreroth - 08-20-2011

Ｍｙ CPU　ｒａｍ　ｉｓ　ｊｕｓｔ　３ＧＢ，　ｔｈｅｒｅｆｏｒｅ　ｉ　ｎｅｅｄ　ｔｏ　ｋｎｏｗ　ｗｈａｔ　ａｒｅ　ｔｈｅ　ｓｅｔｔｉｎｇ　ｉｓ　ｓｕｉｔａｂｌｅ　ｔｏ　ｒｕｎ　ｐｅｒｆｅｃｔｌｙ　ｂｅｃａｕｓｅ　ｓｏｍｅｔｉｍｅｓ　ａｓ　ｔｈｅ　ＰＣ　ｗｉｌｌ　ｊａｍ　ｏｒ　ｔｈｅ　ｇａｍｅ　ｃｒｕｓｈ．

ｔｈａｎｋｓ　ａ　ｍｉｌｌｉｏｎ　ｆｏｒ　ｔｈｅ　ｈｅｌｐ　ｉｆ　ａｎｙ１　ｃａｎ　ｈｅｌｐ

RE: JPCSP Launcher [v1.6.0.1] - dista_bagus - 08-20-2011

Code:
blacklynx, for you spec.

open Jpcsp launcher. click ADV

Tab Basic :

System Profile=>CPU SSE4.1+-4GB+Ram

Garbage Collector=>ConcMarkSweep

Tab Advanced Java :

change -XX:UseSSE:99 to -XX:UseSSE:4

Code:
Hreroth, what your proc?

if AMD then use

Tab Basic :

System Profile=>CPU SSE3-4GB+Ram

Garbage Collector=>ConcMarkSweep

Tab Advanced Java :

change -XX:UseSSE:99 to -XX:UseSSE:3

but if use Intel Core 2 Duo/Core 2 Quad use above.

Code:
Sarim, your proc?

Tab Basic :

System Profile=>Custom

Garbage Collector=>Default

Tab Advanced Java :

change -XX:UseSSE:99 to -XX:UseSSE:2

for Xss size & Xms size value maybe someone know with your only RAM 1GB.

Hyakki, for -XX:+UseSSE42Intrinsics is it only for Intel Core 2 Quad or can be use with AMD Phenom II X4?

RE: JPCSP Launcher [v1.6.0.1] - hyakki - 08-20-2011

I think only the I7 and I5 (or newer) support SSE 4.2.
as far as i know, no amd processors support it either.

http://en.wikipedia.org/wiki/SSE4#SSE4.2

RE: JPCSP Launcher [v1.6.0.1] - dista_bagus - 08-20-2011

oh i see. luck for those who have i7 & i5.

RE: JPCSP Launcher [v1.6.0.1] - Bloodsaw90 - 08-20-2011

(08-20-2011, 07:46 AM)hyakki Wrote: I think only the I7 and I5 (or newer) support SSE 4.2.
as far as i know, no amd processors support it either.

http://en.wikipedia.org/wiki/SSE4#SSE4.2

Yep AMD's highest SSE is a small copy of SSE4 called SSE4a.

(08-15-2011, 07:58 PM)hyakki Wrote: hm that's the first I've heard of this problem, sounds like something is locking the ini file causing it not to write.
what antivirus software do you use since some even though they are disabled still have their filesystem driver still enabled.
have you tried a shorter path like c:\jpcsp it could be a strange characters in the path causing an issue.

I have tested on windows XP pro sp3 32bit, I have even tested it on lan shares, usb, and removable hard drives to make sure it works on various situations, so a very strange problem.

is it the program that popups the message in the tray icon or is it an error window?

Hm its getting even stranger lol.
After reading your message i wanted to make a screenshot to show u how it looks like, but then the program closed normally and seems to have write the .ini sucessfully.
On the day i posted this i've tried to restart my pc three times, still having the problem, but now its gone and i am not able to reproduce the error.

Maybe was a temporaly problem of my OS.

Thanks anyway. Smile

RE: JPCSP Launcher [v1.6.0.1] - Hreroth - 08-20-2011

dista_bagus, thanks for your reply Big Grin

My Cpu is Core i3 2.93GHz, 1.93GB of ram & my current JPCSP is v0.6 2091

sorry to cause u more problem as i cant understand the solution that you posted & can explain how to do it?

System Profile=>CPU SSE3-4GB+Ram
[b]Garbage Collector=>ConcMarkSweep
Tab Advanced Java :
change -XX:UseSSE:99 to -XX:UseSSE:3[/b]