Tales of VS - ULJS00209

[nash67]

with the added line or if you even just have the line by itself the game goes to load then it comes up with a grey screen and the message
the game could not be started 800200D9
which means Error while allocating memory block

[gid15]

with the added line or if you even just have the line by itself the game goes to load then it comes up with a grey screen and the message
the game could not be started 800200D9
which means Error while allocating memory block

Could you retry with the JpcspTrace from r3093? (update the 2 prx files).

[nash67]

using r 3093
here is the JpcspTrace log

[gid15]

using r 3093
here is the JpcspTrace log

OK, now I can see that the application is using the same values on a PSP but they are accepted there:

Code:

08:35:45 ATRAC3 0 - sceAtracSetDataAndGetID 0x96EB540, 0xDEADBEEF = 0x2

So, sceAtracSetDataAndGetID has to be improved to accepted such values as well.

[gid15]

using r 3093
here is the JpcspTrace log

OK, now I can see that the application is using the same values on a PSP but they are accepted there:

Code:

08:35:45 ATRAC3 0 - sceAtracSetDataAndGetID 0x96EB540, 0xDEADBEEF = 0x2

So, sceAtracSetDataAndGetID has to be improved to accepted such values as well.

Is it now fixed in r3094?

[sum2012]

r3094 fixed but no human voice in the movie.
Attach hle.sceAtrac3plus debug log

using r 3093
here is the JpcspTrace log

OK, now I can see that the application is using the same values on a PSP but they are accepted there:

Code:

08:35:45 ATRAC3 0 - sceAtracSetDataAndGetID 0x96EB540, 0xDEADBEEF = 0x2

So, sceAtracSetDataAndGetID has to be improved to accepted such values as well.

Is it now fixed in r3094?

[gid15]

r3094 fixed but no human voice in the movie.
Attach hle.sceAtrac3plus debug log

Where is this voice supposed to start in the log file? At which timestamp?

[nash67]

i did my own log then looked through sum2012 and this is where it starts in sum2012 log

05:15:27 DEBUG hle.sceAtrac3plus - ATRAC3 1 - sceAtracSetDataAndGetID buffer=0x09A7F940, bufferSize=0x20000
05:15:27 DEBUG hle.sceAtrac3plus - ATRAC3 1 - WAVE format: magic=0x20746D66('fmt '), chunkSize=52, compressionCode=0xFFFE, channels=2, outputChannels=2, sampleRate=44100, bitrate=16021, bytesPerFrame=744, hiBytesPerSample=0
05:15:27 DEBUG hle.sceAtrac3plus - ATRAC3 1 - Additional chunk data: 22 00 00 08 03 00 00 00 BF AA 23 E9 58 CB 71 44 A1 19 FF FA 01 E4 CE 62 01 00 28 5C 00 00 00 00 00 00 00 00

[gid15]

I just saw that every atrac set with bufferSize=0xDEADBEEF is not working yet, it is ending immediately:

Code:

05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - sceAtracSetDataAndGetID buffer=0x097FA550, bufferSize=0xDEADBEEF
05:15:42  INFO hle.sceAtrac3plus - ATRAC3 0 - hleAtracSetData atracID=1, buffer=0x097FA550, readSize=0xDEADBEEF, bufferSize=0xDEADBEEF, fileSize=0xDE5C
05:15:42  INFO      hle - ATRAC3 0 - Decodable AT3 data detected.
05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - hleSetHalfwayBufferAndGetID returning atID=0x1
05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - sceAtracGetSecondBufferInfo atID=0x1, outPosition=0x09FADA8C, outBytes=0x09FADA88
05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - sceAtracSetLoopNum atID=0x1, loopNbr=0xFFFFFFFF
05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - sceAtracGetRemainFrame atID=0x1, remainFramesAddr=0x08A963B8
05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - sceAtracGetRemainFrame returning -1, AtracID[id=1, inputBufferAddr=0x097FA550, inputBufferSize=-559038737, inputBufferOffset=0, inputBufferWritableBytes=0, inputBufferNeededBytes=0, channels=2, outputChannels=2]
05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - sceAtracDecodeData atID=0x1, samplesAddr=0x09AAC1C0, samplesNbrAddr=0x09FADA8C, outEndAddr=0x08A96428, remainFramesAddr=0x08A963B8
05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - sceAtracDecodeData returning 0x00000000, samples=1024, end=1, remainFrames=-1, currentSample=1024/-1, AtracID[id=1, inputBufferAddr=0x097FA550, inputBufferSize=-559038737, inputBufferOffset=-559038737, inputBufferWritableBytes=0, inputBufferNeededBytes=0, channels=2, outputChannels=2]
05:15:42 DEBUG hle.sceAtrac3plus - ATRAC3 0 - sceAtracReleaseAtracID atID=0x1

[sum2012]

I attach sceAtrac3plus debug log from #18
End log is just play finish human voice.